CZTInterconnect Solutions

RJ45 Connectors & Ethernet Connectivity Solutions

Select RJ45 modular jacks, plugs, and integrated magnetics for your Ethernet design. Compare the port layout, PHY circuit, mechanical drawing, and model-specific ratings before requesting samples.

RJ45 Product Selection

Find the right interface for your board and application

Compare available models by connector type, port count, orientation, shielding, and magnetics. Open the product drawing for dimensions and electrical details, or send a reference part for engineering review.

381
Product models
347
With PDF downloads
34
Drawing review on request
347
With drawing references

Choose Your RJ45 Connector Type

Single-Port RJ45 Jacks

Start with mating direction, PCB footprint, enclosure opening, shielding, and LED needs. Confirm the connector configuration against the selected drawing.

Multi-Port RJ45 Jacks

Compare side-by-side and stacked port layouts for networking equipment. Check port pitch, board height, shield tabs, and LED connections before selection.

RJ45 with Integrated Magnetics

Integrated connector modules combine the RJ45 interface with magnetic circuitry. Select the Base-T rating and PHY-side circuit for the specific model.

Modular Plugs

Match the plug to the cable construction, conductor dimensions, contact layout, shield, and termination process. Request the applicable assembly drawing.

How to Select an RJ45 Connector

Use these five checks to prepare a shortlist for drawing review.

1. Choose the interface

Specify a PCB jack, a cable plug, or a jack with integrated magnetics. Include the required number of ports and their arrangement.

2. Match the Ethernet circuit

State the Base-T rate and PHY. For an ICM, compare the magnetic circuit and electrical table; for PoE, include the power and current requirements.

3. Check mechanical fit

Send the PCB footprint, board height, mating direction, enclosure opening, and any restrictions around the shield or adjacent connectors.

4. Define the configuration

Identify LED colors and polarity, shield grounding, contact plating, soldering process, and operating conditions.

5. Review the drawing

Confirm the part number and drawing revision with engineering before sample approval or production release.

Integrated Magnetics Selection

Compare ICM circuits and mechanical layouts

Start with the port layout and the required Ethernet interface. Use the catalog drawings and electrical tables to compare magnetic circuits, LEDs, and board dimensions for the shortlisted models.

Use the mechanical drawing to check mounting dimensions, pin layout, shield tabs, and port orientation.
Match the magnetic circuit and electrical performance table to the Ethernet PHY and the required Base-T rate.
Confirm the final model, drawing revision, LED configuration, plating, and qualification requirements before sample approval.
Download RJ45 Magnetics Catalog

ADSL modems, cable modems, servers, LOM, hubs, and switches

1xN Integrated Magnetics

TAB down and TAB up RJ45 ICM modules for 10/100 and 1000 Base-T platforms.

CPE, embedded networking, video, hub, and switch designs

1x1 Vertical Jack ICM

Vertical RJ45 jack modules with integrated transformer circuitry for compact PCB layouts.

Routers, servers, hubs, and switching equipment

2xN Stack Jack ICM

High-density stacked RJ45 modules for multi-port equipment and networking infrastructure.

LAN-on-motherboard and PC applications

RJ45 + USB / HDMI ICM

Combination interface modules pairing Ethernet magnetics with adjacent I/O connectivity.

Model-specific 10G Ethernet designs

10GBASE-T ICM

Review the selected 10G model's magnetic performance table, PHY-side circuit, and board layout requirements.

Model References

Compare Documented RJ45 ICM Models

These examples show why speed, configuration, and operating conditions must be checked by model. The linked published specifications are references; confirm the current drawing revision and final configuration before sample approval.

RJ45 integrated magnetics model references and qualification fields
Model / InterfacePublished ReferenceRFQ Review Fields
JDFU41590204

10/100BASE-T ICM, 1×4 ports

The published approval drawing identifies a four-port 10/100 model and includes its magnetic circuit and electrical table.

View published specification
Tab direction, LED polarity, footprint, magnetic circuit, and the current drawing revision.
JDD240870242

1000BASE-T ICM, 8 ports

The published model specification lists an operating range of −40°C to +85°C. Its approval drawing specifies contact-area gold in micro-inches.

View published specification
Eight-port layout, PHY circuit, shield and LED connections, contact plating, and drawing revision.
JDTU44480032

10G RJ45 ICM

The published model specification lists 10G operation and an operating range of 0°C to +70°C.

View published specification
Port arrangement, mounting dimensions, high-frequency electrical table, and the required operating environment.
Electrical performance table

Electrical performance table

Catalog tables capture parameters such as turn ratio, insertion loss, return loss, crosstalk, CMRR, and Hipot.

Mechanical drawing reference

Mechanical drawing reference

Drawing extracts help engineering confirm height, pin layout, shield tabs, and enclosure fit before sample selection.

Products (178)

Quad-Port PCB Mount Shielded RJ45 Modular Jack
RJ45

Quad-Port PCB Mount Shielded RJ45 Modular Jack

E5900035

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details
Eight-Port PCB Mount Shielded RJ45 Modular Jack
RJ45

Eight-Port PCB Mount Shielded RJ45 Modular Jack

E59C07083103

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details
Single-Port PCB Mount Shielded RJ45 Modular Jack
RJ45

Single-Port PCB Mount Shielded RJ45 Modular Jack

E59Q07091702

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details
Single-Port PCB Mount Shielded RJ45 Modular Jack
RJ45

Single-Port PCB Mount Shielded RJ45 Modular Jack

E59L09042201

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details
Single-Port PCB Mount Shielded RJ45 Modular Jack
RJ45

Single-Port PCB Mount Shielded RJ45 Modular Jack

E5900012

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details
Quad-Port PCB Mount Shielded RJ45 Modular Jack
RJ45

Quad-Port PCB Mount Shielded RJ45 Modular Jack

E5900023

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details
Quad-Port PCB Mount Shielded LED RJ45 Modular Jack
RJ45

Quad-Port PCB Mount Shielded LED RJ45 Modular Jack

E59120402

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details
Dual-Port PCB Mount Shielded RJ45 Modular Jack
RJ45

Dual-Port PCB Mount Shielded RJ45 Modular Jack

E59QWY-1081-27

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details
Single-Port PCB Mount Shielded LED RJ45 Modular Jack
RJ45

Single-Port PCB Mount Shielded LED RJ45 Modular Jack

E59100400

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details
Quad-Port PCB Mount Shielded LED RJ45 Modular Jack
RJ45

Quad-Port PCB Mount Shielded LED RJ45 Modular Jack

E59110702

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details
Single-Port SMT Shielded Modular Jack
RJ45

Single-Port SMT Shielded Modular Jack

ESM091000

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details
Single-Port SMT Shielded Modular Jack
RJ45

Single-Port SMT Shielded Modular Jack

ESMTC07081408

  • Rated Current: 1.5 A @ 25°C
  • Rated Voltage: 150 V AC
  • Insulation Resistance: 1000 MΩ Min @ 100 V DC
View Details

Additional RJ45 Models

Request a Drawing for These Models

For these 34 additional models, send the part number and your application requirements to request drawing and specification review. Confirm the final configuration before selecting a sample.

Single-Port Vertical Shielded RJ45 Modular JackE52141101Drawing available on requestSingle-Port PCB Mount Shielded LED Modular JackE52150800Drawing available on requestSingle-Port PCB Mount RJ45 Modular JackE52190401Drawing available on requestSingle-Port PCB Mount RJ45 Modular JackESP190400Drawing available on requestSingle-Port PCB Mount RJ45 Modular JackESP190702Drawing available on requestSingle-Port PCB Mount LED RJ45 Modular JackESP190701Drawing available on requestSingle-Port PCB Mount Unshielded RJ45 Modular JackY14080074Drawing available on requestQuad-Port PCB Mount Shielded LED RJ45 Modular JackE52100903Drawing available on requestQuad-Port PCB Mount Shielded LED RJ45 Modular JackE52100902Drawing available on requestQuad-Port PCB Mount Shielded LED RJ45 Modular JackE52101100Drawing available on requestQuad-Port PCB Mount Shielded LED RJ45 Modular JackE52110301Drawing available on requestSingle-Port Right-Angle Shielded RJ45 Modular JackE52Q07092504Drawing available on requestSingle-Port Right-Angle Shielded RJ45 Modular JackE52Q07092602Drawing available on requestSingle-Port PCB Mount Shielded RJ45 Modular JackE65150200Drawing available on requestSingle-Port PCB Mount Shielded LED RJ45 Modular JackE6500009Drawing available on requestSingle-Port PCB Mount Shielded LED RJ45 Modular JackE65110900Drawing available on requestSingle-Port PCB Mount Shielded LED RJ45 Modular JackE6500013Drawing available on requestSingle-Port PCB Mount Shielded RJ45 Modular JackQWY-1002-8Drawing available on requestSingle-Port PCB Mount ICM RJ45 Integrated Magnetics JackJBGU10850022Drawing available on requestSingle-Port PCB Mount ICM RJ45 Integrated Magnetics JackJDD249110007Drawing available on requestSingle-Port PCB Mount ICM RJ45 Integrated Magnetics JackJDTU13290265Drawing available on requestSingle-Port PCB Mount ICM RJ45 Integrated Magnetics JackJVG110051801Drawing available on requestSingle-Port PCB Mount ICM RJ45 Integrated Magnetics JackJVG110610815Drawing available on requestSingle-Port PCB Mount ICM RJ45 Integrated Magnetics JackJVG110750101Drawing available on requestSingle-Port PCB Mount Shielded RJ45 Modular JackESP130500Drawing available on requestSingle-Port PCB Mount ICM RJ45 Integrated Magnetics JackJDGD14100001Drawing available on requestSingle-Port PCB Mount Shielded LED RJ45 Modular JackESP110600Drawing available on requestSingle-Port PCB Mount Shielded LED RJ45 Modular JackESP100502Drawing available on requestDual-Port PCB Mount Shielded LED ICM RJ45 Integrated Magnetics JackJBF111050022Drawing available on requestSingle-Port Vertical Shielded LED ICM RJ45 Integrated Magnetics JackJDFU11690204Drawing available on requestSingle-Port PCB Mount Shielded RJ45 Cable Assembly616E-B InsertDrawing available on requestSingle-Port PCB Mount RJ45 Cable Assembly616TDrawing available on requestSingle-Port PCB Mount Shielded RJ45 Cable Assembly623M(024)Drawing available on requestSingle-Port PCB Mount Shielded RJ45 Cable Assembly623YDrawing available on request

Check the Selected Model Before Approval

Review ItemWhat to Confirm
Ethernet and PHYRequired Base-T rate, PHY reference circuit, transformer ratio, center taps, and pin assignment.
Magnetic performanceInsertion loss, return loss, crosstalk, common-mode rejection, inductance, and isolation at the frequencies and conditions in the model specification.
PoE requirementsPSE or PD application, target power, current path, temperature rise, and the selected connector and magnetics ratings.
PCB and enclosure fitPort count, tab direction, mating height, mounting holes, shield tabs, footprint, and panel clearance.
Shield and LEDsShield grounding, LED colors, polarity, pinout, and light-pipe arrangement where applicable.
Contacts and durabilityContact material, plating thickness and unit, mating cycles, and retention requirements from the drawing. Gold thickness is commonly stated in micro-inches (µin) in the referenced drawings.
Environment and qualificationModel-specific operating temperature, soldering conditions, and any required sealing or compliance documentation.

Prepare Your RJ45 RFQ

Send the Details Engineering Needs

Send a model number or reference drawing together with the interface requirements. Include the items below so the connector, circuit, and mechanical fit can be reviewed together.

Submit an RJ45 RFQ
  • Application, Ethernet PHY, and required Base-T rate
  • Existing CZT part number, reference part, or mechanical drawing
  • Port count, orientation, PCB footprint, and enclosure constraints
  • Magnetics circuit, PoE power requirements, shield, and LEDs
  • Temperature, plating, soldering process, and qualification requirements
  • Sample quantity, estimated production demand, and project schedule

Applications

Data Centers

Review port density, magnetics, LED connections, and mechanical clearance for switches, servers, and networking equipment.

Enterprise Networking

Match board-level RJ45 interfaces and modular plugs to equipment requirements and the intended cable and termination system.

Industrial Automation

Specify the temperature, vibration, enclosure, and sealing requirements for PLCs, HMIs, and control equipment during model review.

Telecom Infrastructure

Compare single-port and multi-port ICM circuits, footprints, and interface requirements for telecom and customer-premises equipment.

RJ45 Connector Buying Questions

Should I choose an RJ45 jack or an integrated magnetics connector?

Start with the Ethernet PHY reference design. An ICM combines the jack and magnetic circuitry; a modular jack requires the rest of the interface to be reviewed separately. Send the PHY circuit and board constraints so the connector pinout and magnetic arrangement can be checked together.

Are all RJ45 connectors suitable for 10G Ethernet or PoE?

Select by the individual model specification. The reference models on this page include 10/100, 1000BASE-T, and 10G interfaces with different operating conditions. For PoE, include the power target and current requirements so the connector and magnetic circuit can be reviewed for that application.

Can a replacement use the same PCB footprint?

A similar appearance or port count does not establish a drop-in replacement. Compare the full mechanical drawing, signal and LED pin assignments, shield tabs, magnetics circuit, and electrical ratings before approving a substitute.

What should I send for a drawing or sample review?

Include the part number or reference drawing, application, PHY, Base-T rate, port layout, PCB and enclosure dimensions, LEDs, shielding, temperature, and any PoE needs. Add sample quantity and project schedule so the sales and engineering teams can review the request.

Review Your RJ45 Connector Requirements

Share your selected model, drawing, or reference part. Include the electrical interface and mechanical requirements for a focused review of connector options, sample needs, and quotation details.

RJ45 Connectors, Modular Jacks & Integrated Magnetics | CZT