RJ45 Product Selection
Find the right interface for your board and application
Compare available models by connector type, port count, orientation, shielding, and magnetics. Open the product drawing for dimensions and electrical details, or send a reference part for engineering review.
Choose Your RJ45 Connector Type
Single-Port RJ45 Jacks
Start with mating direction, PCB footprint, enclosure opening, shielding, and LED needs. Confirm the connector configuration against the selected drawing.
Multi-Port RJ45 Jacks
Compare side-by-side and stacked port layouts for networking equipment. Check port pitch, board height, shield tabs, and LED connections before selection.
RJ45 with Integrated Magnetics
Integrated connector modules combine the RJ45 interface with magnetic circuitry. Select the Base-T rating and PHY-side circuit for the specific model.
Modular Plugs
Match the plug to the cable construction, conductor dimensions, contact layout, shield, and termination process. Request the applicable assembly drawing.
How to Select an RJ45 Connector
Use these five checks to prepare a shortlist for drawing review.
1. Choose the interface
Specify a PCB jack, a cable plug, or a jack with integrated magnetics. Include the required number of ports and their arrangement.
2. Match the Ethernet circuit
State the Base-T rate and PHY. For an ICM, compare the magnetic circuit and electrical table; for PoE, include the power and current requirements.
3. Check mechanical fit
Send the PCB footprint, board height, mating direction, enclosure opening, and any restrictions around the shield or adjacent connectors.
4. Define the configuration
Identify LED colors and polarity, shield grounding, contact plating, soldering process, and operating conditions.
5. Review the drawing
Confirm the part number and drawing revision with engineering before sample approval or production release.
Integrated Magnetics Selection
Compare ICM circuits and mechanical layouts
Start with the port layout and the required Ethernet interface. Use the catalog drawings and electrical tables to compare magnetic circuits, LEDs, and board dimensions for the shortlisted models.
ADSL modems, cable modems, servers, LOM, hubs, and switches
1xN Integrated Magnetics
TAB down and TAB up RJ45 ICM modules for 10/100 and 1000 Base-T platforms.
CPE, embedded networking, video, hub, and switch designs
1x1 Vertical Jack ICM
Vertical RJ45 jack modules with integrated transformer circuitry for compact PCB layouts.
Routers, servers, hubs, and switching equipment
2xN Stack Jack ICM
High-density stacked RJ45 modules for multi-port equipment and networking infrastructure.
LAN-on-motherboard and PC applications
RJ45 + USB / HDMI ICM
Combination interface modules pairing Ethernet magnetics with adjacent I/O connectivity.
Model-specific 10G Ethernet designs
10GBASE-T ICM
Review the selected 10G model's magnetic performance table, PHY-side circuit, and board layout requirements.
Model References
Compare Documented RJ45 ICM Models
These examples show why speed, configuration, and operating conditions must be checked by model. The linked published specifications are references; confirm the current drawing revision and final configuration before sample approval.
| Model / Interface | Published Reference | RFQ Review Fields |
|---|---|---|
| JDFU41590204 10/100BASE-T ICM, 1×4 ports | The published approval drawing identifies a four-port 10/100 model and includes its magnetic circuit and electrical table. View published specification | Tab direction, LED polarity, footprint, magnetic circuit, and the current drawing revision. |
| JDD240870242 1000BASE-T ICM, 8 ports | The published model specification lists an operating range of −40°C to +85°C. Its approval drawing specifies contact-area gold in micro-inches. View published specification | Eight-port layout, PHY circuit, shield and LED connections, contact plating, and drawing revision. |
| JDTU44480032 10G RJ45 ICM | The published model specification lists 10G operation and an operating range of 0°C to +70°C. View published specification | Port arrangement, mounting dimensions, high-frequency electrical table, and the required operating environment. |

Electrical performance table
Catalog tables capture parameters such as turn ratio, insertion loss, return loss, crosstalk, CMRR, and Hipot.

Mechanical drawing reference
Drawing extracts help engineering confirm height, pin layout, shield tabs, and enclosure fit before sample selection.
Products (97)
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDG241530101
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDG260620039
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDG261015222
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDG280371539
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDG281890042
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDGD19150025
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDGD23950000
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDGU13050607
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDGU13060007
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDGU13580422Y
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDGU13650100
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
RJ45Single-Port PCB Mount ICM RJ45 Integrated Magnetics Jack
JDGU16600322
- Rated Current: 0.1 A
- Rated Voltage: 48 V DC
- Insulation Resistance: 500 MΩ Min
Additional RJ45 Models
Request a Drawing for These Models
For these 34 additional models, send the part number and your application requirements to request drawing and specification review. Confirm the final configuration before selecting a sample.
Check the Selected Model Before Approval
| Review Item | What to Confirm |
|---|---|
| Ethernet and PHY | Required Base-T rate, PHY reference circuit, transformer ratio, center taps, and pin assignment. |
| Magnetic performance | Insertion loss, return loss, crosstalk, common-mode rejection, inductance, and isolation at the frequencies and conditions in the model specification. |
| PoE requirements | PSE or PD application, target power, current path, temperature rise, and the selected connector and magnetics ratings. |
| PCB and enclosure fit | Port count, tab direction, mating height, mounting holes, shield tabs, footprint, and panel clearance. |
| Shield and LEDs | Shield grounding, LED colors, polarity, pinout, and light-pipe arrangement where applicable. |
| Contacts and durability | Contact material, plating thickness and unit, mating cycles, and retention requirements from the drawing. Gold thickness is commonly stated in micro-inches (µin) in the referenced drawings. |
| Environment and qualification | Model-specific operating temperature, soldering conditions, and any required sealing or compliance documentation. |
Prepare Your RJ45 RFQ
Send the Details Engineering Needs
Send a model number or reference drawing together with the interface requirements. Include the items below so the connector, circuit, and mechanical fit can be reviewed together.
Submit an RJ45 RFQ- Application, Ethernet PHY, and required Base-T rate
- Existing CZT part number, reference part, or mechanical drawing
- Port count, orientation, PCB footprint, and enclosure constraints
- Magnetics circuit, PoE power requirements, shield, and LEDs
- Temperature, plating, soldering process, and qualification requirements
- Sample quantity, estimated production demand, and project schedule
Applications
Data Centers
Review port density, magnetics, LED connections, and mechanical clearance for switches, servers, and networking equipment.
Enterprise Networking
Match board-level RJ45 interfaces and modular plugs to equipment requirements and the intended cable and termination system.
Industrial Automation
Specify the temperature, vibration, enclosure, and sealing requirements for PLCs, HMIs, and control equipment during model review.
Telecom Infrastructure
Compare single-port and multi-port ICM circuits, footprints, and interface requirements for telecom and customer-premises equipment.
RJ45 Connector Buying Questions
Should I choose an RJ45 jack or an integrated magnetics connector?
Start with the Ethernet PHY reference design. An ICM combines the jack and magnetic circuitry; a modular jack requires the rest of the interface to be reviewed separately. Send the PHY circuit and board constraints so the connector pinout and magnetic arrangement can be checked together.
Are all RJ45 connectors suitable for 10G Ethernet or PoE?
Select by the individual model specification. The reference models on this page include 10/100, 1000BASE-T, and 10G interfaces with different operating conditions. For PoE, include the power target and current requirements so the connector and magnetic circuit can be reviewed for that application.
Can a replacement use the same PCB footprint?
A similar appearance or port count does not establish a drop-in replacement. Compare the full mechanical drawing, signal and LED pin assignments, shield tabs, magnetics circuit, and electrical ratings before approving a substitute.
What should I send for a drawing or sample review?
Include the part number or reference drawing, application, PHY, Base-T rate, port layout, PCB and enclosure dimensions, LEDs, shielding, temperature, and any PoE needs. Add sample quantity and project schedule so the sales and engineering teams can review the request.
Related Product Categories
Review Your RJ45 Connector Requirements
Share your selected model, drawing, or reference part. Include the electrical interface and mechanical requirements for a focused review of connector options, sample needs, and quotation details.